Vigor Peptides

We’re aware of an issue with our primary card processor and are working to resolve it. In the meantime, save an extra 5% when you pay with Venmo, Same Day Bank Payment, or crypto. You can still pay by card through our alternate provider.

Semax + Selank Research Spray — 10mg / 10mg

★MADE IN USA
✓cGMP-CERTIFIED U.S. FACILITY
✓BATCH TESTED

This 15 mL metered research spray contains 10 mg Semax and 10 mg Selank in one bottle. The two peptides have separate reference sequences and are documented together in the lot’s Certificate of Analysis.

Research Configuration
10 mg Semax · 10 mg Selank

Total Content: 20 mg
Form: Metered Research Spray

Availability: In stock

$99.00 USD

Availability: In stock

Certificate of Analysis — Current Batch
View the most recent batch-specific COA and verification details for this product.
Historical COAs are available in the product gallery.

Product Description

What is Semax + Selank Research Spray?

This 15 mL metered research spray contains 10 mg Semax and 10 mg Selank in one bottle. The two peptides have separate reference sequences and are documented together in the lot’s Certificate of Analysis.

Product Specifications

DesignationSemax + Selank Research Spray
Total Content20 mg
FormMetered Research Spray
Research UseLaboratory Research Only
Bottle Volume15 mL
Metered Output0.1 mL per actuation

Research Configuration: 10 mg Semax · 10 mg Selank

Analytical Verification

Use the existing COA box for the lab report and LIMS verification. Match the report to the vial or bottle lot before recording its measured results. See Quality & Testing Standards for the testing program.

Research Context

The two peptides have different sequences and appear in separate areas of neuroscience research. Tech Data explains their reference identities and distinguishes the combined bottle from the individual lyophilized vials.

Related Research Formats

For individual lyophilized research materials, see the Semax 5 mg vial and the Selank 5 mg vial.

Research Use Notice

For laboratory research only. Not for human or veterinary use, diagnosis, treatment, or consumption.

Technical Identity

This 15 mL metered research spray contains 10 mg Semax and 10 mg Selank in one bottle. The two peptides have separate reference sequences and are documented together in the lot’s Certificate of Analysis. The individual peptide records below describe the molecular references for Semax and Selank. The label describes the combined material in the bottle. Use the report tied to that bottle’s lot for the analytical findings.

Semax Reference Data

SequenceMEHFPGP
Chain Length7 Amino Acids
Molecular FormulaC37H51N9O10S
Molecular Weight813.9 g/mol
CAS Reference80714-61-0
PubChem CID9811102

Reference values describe the Semax identity cataloged by PubChem. A batch result is tied to the tested sample and the analytical method shown on the report.

Selank Reference Data

SequenceTKPRPGP
Chain Length7 Amino Acids
Molecular FormulaC33H57N11O9
Molecular Weight751.9 g/mol
CAS Reference129954-34-3
PubChem CID11765600

Reference values describe the Selank identity cataloged by PubChem. A batch result is tied to the tested sample and the analytical method shown on the report.

Material Configuration

FormMetered Research Spray
ConfigurationTwo-Component Research Preparation
Labeled Content20 mg total
Presentation15 mL Bottle
Bottle Volume15 mL
Metered Output0.1 mL per actuation

Research Configuration: 10 mg Semax · 10 mg Selank

Analytical Documentation

Use the existing COA box for the lab report and LIMS verification. Use the lot identifier on the bottle to find the applicable Certificate of Analysis. The Quality & Testing Standards page describes the testing program.

For example, Accumark Labs’ report for lot RSXI6J identifies both peptides and lists total blend purity and quantity. Those combined values belong to the tested sample. Use the component-specific lines only when the report provides separate values. If a different lot is supplied, check the report associated with its own lot number.

Semax and Selank Peptide Identity

What identifies Semax?

Semax is the seven-residue sequence MEHFPGP. The PubChem entry describes the first four residues as ACTH positions 4–7, followed by Pro-Gly-Pro. Separate Semax literature sometimes uses the description ACTH (4–10) analogue. For a technical record, use the specific Semax sequence and reference identifiers shown in its grid.

What identifies Selank?

Selank is the seven-residue sequence TKPRPGP. Its first four residues correspond to tuftsin, and the remaining three are Pro-Gly-Pro. The reference mass and registry identifier in the Selank grid belong to Selank. Keep that identity separate from the Semax entry when reading the lot report, even though both are present in the same finished material.

Semax vs. Selank in Neuroscience Research

What can the single-compound papers tell you?

Separate laboratory publications have examined Semax and BDNF or TrkB expression in rat hippocampus (PMID 16996037), and Selank and selected neurotransmission-related transcripts in rat frontal cortex (PMCID PMC4757669). These papers describe different materials, tissue models, and endpoints. Keep each observation attached to the compound and model in its source. The identity testing for this spray verifies the sample described by its report.

How should a combined sample be documented?

The Semax reference begins with MEHF. The Selank reference begins with TKPR. Both end in Pro-Gly-Pro, but the different first four residues give them separate sequence and mass records. This distinction matters when reading a peptide identity report or comparing a paper that studied one material with a listing that contains both. A research record for the combined material should list both components, the 10 mg label amount for each, the bottle format, and the matched lot. If a paper tested one compound, keep its experimental data under that individual compound rather than treating it as a result for the combined sample.

Metered Spray vs. Lyophilized Research Vials

What is on the bottle label?

The label specifies a 15 mL metered bottle, 0.1 mL per actuation, and 10 mg each of Semax and Selank. The 20 mg labeled total describes the two peptides combined across the bottle. In an inventory record, retain the component amounts, total peptide content, and bottle volume as separate fields. The Certificate of Analysis provides the measured results reported for the tested lot.

Where are the individual peptide formats?

The Semax peptide 5 mg vial and Selank peptide 5 mg vial are individual lyophilized research materials. Each has its own reference and lot record. The combined product is a metered research spray with two labeled components. Identify the exact catalog format when comparing an individual vial with the combined product.

Semax + Selank Research Spray Ordering and Availability

Semax + Selank research spray ordering and availability

This page lists the combined 10 mg / 10 mg formulation in a single 15 mL bottle. Check availability on this listing. For the tested lot, use the current COA and LIMS links associated with this product.

For delivery and order terms, see the Order & Shipping Guide. If you are comparing listings for a lab order, retain the product name and format with the quantity ordered. These fields make it possible to match the received sample to the intended catalog listing.

Semax + Selank Research Spray Analytical Testing and COA Guide

HPLC purity and measured content

HPLC separates sample components under the laboratory’s stated method. A chromatographic purity percentage describes the signal assigned under that method. The labeled peptide content and any measured quantity are separate fields. Check the units on the report and keep each result with the material it describes. For a mixture, distinguish results labeled for the whole sample from results explicitly reported for one component.

Mass spectrometry and reference mass

A mass spectrometry result can help verify identity by comparing observed ions with the expected values for the reference structure. The lab may report mass-to-charge ratios or a mass calculated from several observed charge states. The number displayed in the reference grid is a molecular weight for the stated structure. Compare values on the same basis, including terminal chemistry and any modification listed by the lab.

What to record when comparing two lots

Start with the sample names and lot numbers. Compare the same analyte, the same type of result, and the original units. For example, compare a measured mass result with another measured mass result for that same peptide. A reference value from a database has a separate role. Keep the test date and the lab identifier with each result so the record can be traced back to its source.

Storage and sample identification

Use the current product label or lot documentation for applicable storage information. In a research inventory, record the exact peptide name, catalog format, labeled content, and lot. Keep a copy of the matching report or a way to identify it later. These details distinguish one lot from another even when the reference sequence stays the same.

Research Use Only

For laboratory research only. Not for human or veterinary use, diagnosis, treatment, or consumption. Published research is provided for educational context.

Research use disclaimer
Scroll to Top

VIGOR PEPTIDES

There’s more waiting in your inbox.

Enter your email for unpublished specials and a little something extra from Vigor.

By joining, you agree to receive marketing emails from Vigor Peptides. You can unsubscribe at any time.